PUBLICATIONS

CONFERENCES:

  • "Transverse and Longitudinal CTE Measurements in TEM at Cryogenic and High Temperatures"
    R. Kulkarni, O. Ochoa and Z. Luo
    28th Annual Conference on Composites, Materials and Structures
    Cocoa Beach, Florida     [January 2004]
     

  • "Carbon Foam Core Sandwich Panels"
    M. Sarzynski, S. Mukumdar and O. Ochoa
    The Fifth Annual Air Force Research Laboratory Carbon Foam Workshop
    West Virginia University     [October 2003]
     

  • "Anisotropy in Hickory Shells: Reinforcement Architecture and Material Properties"
    R. Kulkarni, J. Brewer, O. Ochoa and M. Harris
    18th Annual Technical Conference of the American Society of Composites
    Gainesville, Florida [October 2003]
     

  • "Carbon Foam Core Sandwich Beams: Flexure Response"
    M. Sarzynski and O. Ochoa
    The Fourth Canadian-International Composites Conference
    Ottawa, Canada     [19-22 August, 2003]
     

  • "Carbon Foam Core Sandwich Panels: Structural and Fire Resistance Potential"
    M. Sarzynski and O. Ochoa
    The 22nd International Conference on Offshore Mechanics & Arctic Engineering
    Cancun, Mexico     [8-13 June, 2003]
     

  • "Carbon Foam Study: From Ligaments to Sandwich Construction"
    R. Verdugo, M. Sarzynski and O. Ochoa
    The Fourth Annual Air Force Research Laboratory Carbon Foam Workshop
    Oak Ridge National Labs     [October 2002]
     

  • "Flexure Behavior of Composite Spoolable Tubes"
    D. E. Rodriguez and O. Ochoa
    21st International Conference on Offshore Mechanics and Arctic Engineering
    Oslo, Norway     [June 2002]
     

  • "Influence of Geometry, Lay-up, and Material on the Radius of Curvature of Spoolable Composite Tubulars"
    D. E. Rodriguez and O. Ochoa
    Proceedings of the ASC 16th Annual Technical Conference
    Blacksburg, Virginia     [September 2001]

JOURNALS:

  • "Flexural Response of Spoolable Composite Tubulars: An Integrated Experimental and Computational Assessment"
    D. E. Rodriguez and O. Ochoa
    Composite Science and Technology Journal
    [Accepted with revisions December 2003]
THESES:

  • "Carbon Foam Characterization: Sandwich Flexure, Tensile and Shear Response"
    M. Sarzynski
    M.S. Thesis at Texas A&M University
    College Station, Texas [December 2003]
     

  • "Influence of Material, Lay-up, and Geometry on the Radius of Curvature of Spoolable Composite Tubulars"
    D. E. Rodriguez
    M.S. Thesis at Texas A&M University
    College Station, Texas [May 2002]
     
DISSERTATIONS: