Former Students

	Muhammad Ijaz Ph.D., December 2007 Thesis Title: Implicit Runge-Kutta Methods to Simulate Unsteady Incompressible Flows
	Minseok Ko Ph.D., December 2007 Thesis Title: Numerical Simulation of Three-Dimensional Combined Convective Radiative Heat Transfer in Rectangular Channels
	Justin MlCak M.S., May 2007 Thesis Title: Simulation of Three-dimensional Laminar Flow and Heat Transfer in an Array of Parallel Micro-channels
	Juan Gabriel Barbosa Saldana Ph.D., December 2004 Instituto Politécnico Nacional Zacatenco, Mexico Thesis Title: Numerical Simulation of Mixed Convection over a Three-Dimensional Horizontal Backward-Facing Step
	Haitham M. Bahaidarah Ph.D., August 2004 Assistant Professor, King Fahd University of Petroleum & Minerals, Saudi Arabia Thesis Title: A Numerical Study of Heat and Momentum Transfer over a Bank of Flat Tubes
	Kang-Hoon Ko Ph.D., August 2004 Hyundai Motor Company, Korea Thesis Title: Heat Transfer Enhancement in a Channel with Porous Baffles
	Bruno Miranda Monte De Silva M.S., December 2003 Thesis Title: A numerical Study of Convection in a Channel with Porous Baffles
	S. R. Chintada M.S., December 1998 Parametric Technology Corporation, USA Thesis Title: Numerical Study of Flow and Heat Transfer in 3D Serpentine Channels using Collocated Grids
	V. R. Dileep M.S., December 1996 Thesis Title: Aerosol Penetration through Transport Lines
	H. Gong Ph.D., May 1996 Thesis Title: Numerical Prediction of Shrouded Probe Sampling Performance and a Study of Subgrid Scale Models in Large Eddy Simulation
	A. Muyshondt Ph.D., December 1995 Sandia National Laboratories, USA Thesis Title: Aerosol Deposition in Transport Lines
	J. R. Lopez M.S., December 1995 Thesis Title:
	J. C. Watson M.S., May 1995 Thesis Title: Numerical Model of Mixed Convection Heat Transfer Between a Series of Vertical Parallel Plates with Planar Heat Sources
	M. S. Chitti Ph.D., August 1994 YORK International Corporation, USA Thesis Title: Condensation of a New Alternative Refrigerant Flowing inside Horizontal Smooth Tubes
	B. Fan Ph.D., May 1994 Thesis Title: Particle Lift Force and Particle Behavior in Suspension Flows
	J. M. Choi Ph.D., December 1993 Korea Aerospace Research Institute, South Korea Thesis Title: Heat Transfer in a Serpentine Channel with a Series of Right Angle Turns
	Sung-Hoon Kim Ph.D., May 1993 Associate Professor, Keimyung University, South Korea Thesis Title: A Numerical Analysis of Convective Heat Transfer in Channels Simulating Electronic Components
	F. S. Wong M.S., May 1992 Thesis Title:
	J. G. McMath M.S., December 1991 Thesis Title: Numerical Analysis of Laminar Fluid Flow and Heat Transfer in a Parallel Plate Channel with Normally In-Line Positioned Plates
	Asis Nandi M.S., December 1991 Thesis Title: Design and Development of a Cooling Device for Solid Polymer Electrolyte Fuel Cells
	J. P. Lovelady M.S., December 1988 Thesis Title: The Design, Construction, and Calibration of a Heat Exchanger Calorimeter
	J. S. Schliesing M.S., August 1988 Thesis Title: The Effect of Alternate Defrost Strategies on the Reverse-Cycle Defrost of an Air-Source Heat Pump
	R. M. Fithen M.S., August 1987 Associate Professor, Arkansas Tech University, USA Thesis Title: Finite Element Analysis of Conjugate Heat Transfer in Axisymmetric Pipe Flows

Current Students

	Tracy L. Fullerton Ph.D., August 2008 (Expected) Thesis Title: Control Volume Based Finite Element Methods to Simulate Unsteady Flow and Heat Transfer
	Raja Odakkattuvalasu Selvamani M.Sc., December 2008 (Expected) Thesis Title: Three dimensional Numerical Simulation of Flow in a Radially Rotating Microchannel

Back to top