Refereed Journal Publications:

 

(For pdf copies of publications, contact Professor N. K. Anand.)

 

  1. Anand, N.K. and Tree, D.R., "Steady State Simulation of Single Tube-Finned Condenser Heat Exchanger," ASHRAE Transactions, Vol. 88, Pt. 2, pp. 185-200, 1982.
  2. Chen, S.C., Anand, N.K., and Tree, D.R., "Analysis of Transient Laminar Convective Heat Transfer inside a Circular Duct," ASME Journal of Heat Transfer, Vol. 105, pp. 922-924, 1983.
  3. Anand, N.K. and Tree, D.R., "Some Studies of Effects of Axial Conduction in a Tube Wall on the Steady-State Laminar Convective Heat Transfer," ASME Journal of Heat Transfer, Vol. 109, pp. 1025-1028, 1987.
  4. Chellaiah, S., Viskanta, R., Ranganathan, P., and Anand, N.K., "Analysis of Core and Core Barrel Heat-Up Under Conditions Simulating Severe Reactor Accidents," Nuclear Engineering and Design, Vol. 105, pp. 259-267, 1988.
  5. Anand, N.K., Husain, S.R., and Viskanta, R., "Transient Conjugate Heat Transfer in the Matrix of a Thermal Regenerator," Numerical Heat Transfer, Vol. 13, pp. 167-187, 1988.
  6. Fithen, R.M. and Anand, N.K., "Finite Element Analysis of Conjugate Heat Transfer in Axisymmetric Pipe Flows," Numerical Heat Transfer, Vol. 13, pp. 189-203, 1988.
  7. Somasundaram, S., Anand, N.K., and Husain, S.R., "Calculations of Transient Turbulent Heat Transfer in a Rectangular Channel: Two-Layer Model," Numerical Heat Transfer, Vol. 13, pp. 467-480, 1988.
  8. Suh, Y.B., Anand, N.K., Aung, W., and Somasundaram, S., "Steady-State Moisture Profiles in an Unsaturated Porous Medium with Impermeable Boundaries," International Journal of Heat and Mass Transfer, Vol. 31, pp. 2587-2589, 1988.
  9. Kondepudi, S.N., Somasundaram, S., and Anand, N.K., "A Simplified Model for the Analysis of a Phase Change Material Based Thermal Energy Storage System," Heat Recovery Systems & Combined Heat & Power, Vol. 8, pp. 247-254, 1988.
  10. Anand, N.K. and McFarland, A.R., "Particle Deposition in Aerosol Sampling Lines Caused by Turbulent Diffusion and Gravitational Settling," American Industrial Hygiene Association Journal, Vol. 50, pp. 307-312, 1989.
  11. Suh, Y.B., Somasundaram, S., and Anand, N.K., "Remarks on the Potential Cross Flow Over Tube Banks," ASME Journal of Applied Mechanics, Vol. 56, pp. 476-479, 1989.
  12. Somasundaram, S., Anand, N.K., Suh, Y.B., and Aung, W., "Analysis of Moisture Migration in Two-Dimensional Unsaturated Porous Media with Impermeable Boundaries," International Journal of Heat and Mass Transfer, Vol. 32, pp. 1733-1739, 1989.
  13. Anand, N.K., Schliesing, J.S., O'Neal, D.L., and Peterson, K.T., "Effects of Outdoor Coil Fan Pre-Start on Pressure Transients During the Reverse Cycle Defrost of a Heat Pump," ASHRAE Transactions, Vol. 95, Pt. 2, pp. 699-704, 1989.
  14. O'Neal, D.L., Peterson, K.L., Anand, N.K., and Schliesing, J.S., "Refrigeration System Dynamics During the Reverse Cycle Defrost," ASHRAE Transactions, Vol. 95, Pt. 2, pp. 689-698, 1989.
  15. Kim, S.H., Anand, N.K., and Aung, W., "Effect of Wall Conduction on Free Convection Between Asymmetrically Heated Vertical Parallel Plates: Uniform Wall Heat Flux," International Journal of Heat and Mass Transfer, Vol. 33, pp. 1013-1023, 1990.
  16. Anand, N.K., Kim, S.H., and Aung, W., "Effect of Wall Conduction on Free Convection Between Asymmetrically Heated Vertical Parallel Plates: Uniform Wall Temperature," International Journal of Heat and Mass Transfer, Vol. 33, pp. 1025-1028, 1990.
  17. Kim, S.H., Anand, N.K., and Fletcher, L.S., "Free Convection Between Series of Vertical Parallel Plates with Embedded Line Heat Sources," ASME Journal of Heat Transfer, Vol. 113, pp. 108-115, 1991.
  18. McFarland, A.R., Wong, F.S., Anand, N.K., and Ortiz, C.A., "Aerosol Penetration Through a Model Transport System: Comparison of Theory and Experiment," Environmental Science and Technology, Vol. 25, pp. 1573-1577, 1991.
  19. O'Neal, D.L., Peterson, K., and Anand, N.K., "Effect of Short-Tube Orifice Size on the Performance of an Air Source Heat Pump During the Reverse-Cycle Defrost," International Journal of Refrigeration, Vol. 14, pp. 52-57, 1991.
  20. Kim, S.H. and Anand, N.K., "Periodically Fully Developed Flow in Channels with Conducting Blockages," AIAA Journal of thermophysics and Heat Transfer, Vol. 6, pp. 91-97, 1992.
  21. Anand, N.K., McFarland, A.R., Kihm, K.D., and Wong, F.S., "Optimization of Aerosol Penetration Through Transport Lines," Aerosol Science and Technology, Vol. 16, pp. 105-112, 1992.
  22. Anand, N.K., Kim, S.H., and Fletcher, L.S., "The Effect of Plate Spacing on Free Convection Between Heated Parallel Plates," ASME Journal of Heat Transfer, Vol. 114, pp. 515-518, 1992.
  23. Fan, B., McFarland, A.R., and Anand, N.K., "Characterization of the Aerosol Particle Lift Force," Journal of Aerosol Science, Vol. 23, pp. 379-388, 1992.
  24. Fan, B.J., McFarland, A.R., and Anand, N.K., "Aerosol Particle Losses in Isokinetic Sampling Probe Inlets," Environmental Science and Technology, Vol. 26, pp. 390-394, 1992.
  25. Fan, B.J., Wong, F.S., McFarland, A.R., and Anand, N.K., "Aerosol Deposition in Sampling Probes," Aerosol Science and Technology, Vol. 17, pp. 326-332, 1992.
  26. Choi, J.M. and Anand, N.K., "Heat Transfer in A Serpentine Channel with A Series of Right Angle Turns," Numerical Heat Transfer, Part A, Vol. 23, pp. 189-210, 1993.
  27. Gong, H.G., Anand, N.K., and McFarland, A.R., "Numerical Prediction of Performance of Shrouded Probe Sampling in Turbulent Flow," Aerosol Science and Technology, Vol. 9, pp. 294-304, 1993.
  28. Kim, S.H. and Anand, N.K., "Outflow Boundary Condition for Temperature Field in Channels with Periodically Positioned Heat Sources in Presence of Wall Conduction," Numerical Heat Transfer, Part B, Vol. 25, pp. 163-176, 1994.
  29. Kim, S.H. and Anand, N.K., "Turbulent Heat Transfer Between a Series of Parallel Plates with Surface-Mounted Discrete Heat Sources," ASME Journal of Heat Transfer, Vol. 116, pp. 577-587, 1994.
  30. Kim, S.H. and Anand, N.K., "Laminar Developing Flow and Heat Transfer Between a Series of Parallel Plates with Surface Mounted Discrete Heat Sources," International Journal of Heat and Mass Transfer, Vol. 37, pp. 2231-2244, 1994.
  31. Anand, N.K., Chin, C.D., and McMath, J.G., "Heat Transfer in Rectangular Channels With a Series of Normally In-Line Positioned Plates," Numerical Heat Transfer, Part A, Vol. 27, pp. 19-34, 1995.
  32. Chitti, M.S. and Anand, N.K., "An Analytical Model for Local Heat Transfer Coefficients for Forced Convective Condensation Inside Smooth Horizontal Tubes," International Journal of Heat and Mass Transfer, Vol. 38, pp. 615-627, 1995.
  33. Choi, J.M. and Anand, N.K., "Turbulent Heat Transfer in a Serpentine Channel With a Series of Right Angle Turns," International Journal of Heat and Mass Transfer, Vol. 38, pp.1225-1236, 1995.
  34. Kim, S.H. and Anand, N.K., "Laminar Heat Transfer Between a Series of Parallel Plates with Surface-Mounted Discrete Heat Sources," ASME Journal of Electronic Packaging, Vol. 117, pp. 52-62, 1995.
  35. Chitti, M.S. and Anand, N.K., "Condensation Heat Transfer Inside Smooth Horizontal Tubes for R-22 and R32/R125 Mixture," International Journal of HVAC&R Research, Vol. 2, pp. 79-101, 1996.
  36. Choi, J.M., Anand, N.K., Lau, S.C., and Kukreja, R.T., "Heat (Mass) Transfer in a Serpentine Channel with a Series of Right Angle Turns," ASME Journal of Heat Transfer, Vol. 118, pp. 211-213, 1996.
  37. Muyshondt, A., Anand, N.K., and McFarland, A.R., "Turbulent Deposition of Particles in Large Transport Tubes," Aerosol Science and Technology, Vol. 24, pp. 107-116, 1996.
  38. Chitti, M.S. and Anand, N.K., "A Heat Transfer Correlation for Condensation Inside Horizontal Smooth Tubes Using the Population Balance Approach," International Journal of Heat and Mass Transfer, Vol. 39, pp. 2947-2956, 1996.
  39. Muyshondt, A., McFarland, A.R., and Anand, N.K., "Deposition of Aerosol Particles in Contraction Fittings," Aerosol Science and Technology, Vol. 24, pp. 205-216, 1996.
  40. Lopez, J.R., Anand, N.K., and Fletcher, L.S., "Heat Transfer in a Three Dimensional Channel with Baffles," Numerical Heat Transfer, Part A, Vol. 30, pp. 189-205, 1996.
  41. Anand, N.K. and Chiiti, M.S., "Heat Transfer Aspects of Alternative Fluids in HVAC Systems," Thermal Engineering and Science, Published by The Heat Transfer Society of Japan, Vol. 4, pp. 107-115, 1996, Invited Paper.
  42. Wong, F.S., McFarland, A.R., and Anand, N.K., "An Experimental Study of Aerosol Penetration through Horizontal Tubes and Strom-Type Loops," Health Physics, Vol. 71, pp. 886-895, 1996.
  43. Watson, J.C., Anand, N.K., and Fletcher, L.S., "Mixed Convection Between a Series of Vertical Parallel Plates with Planar Heat Sources, ASME Journal of Heat Transfer, Vol. 118, pp. 984-990, 1996.
  44. Gong, H., Chandra, S., McFarland, A.R., and Anand, N.K., "A Predictive Model for Aerosol Transmission Through a Shrouded Probe," Environmental Science & Technology, Vol. 26, pp. 111-126, pp. 3192-3198, 1996.
  45. Guo, Z. and Anand, N.K., "Three Dimensional Heat Transfer in a Channel with a Baffle in the Entrance Region," Numerical Heat Transfer, Part A, Vol. 31, pp. 21-35, 1997.
  46. McFarland, A.R., Gong, H.G., Muyshondt, A., Wente, W.B., and Anand, N.K., "Aerosol Deposition in Bends with Turbulent Flow," Environmental Science and Technology, Vol. 31, pp. 3371-3377, 1997.
  47. Kim, N., Anand, N.K., and Rhode, D.L., "A Study on Convergence Criteria for A SIMPLEBased Finite - Volume Algorithm," Numerical Heat Transfer, Part B, Vol. 34, pp. 401-417, 1998.
  48. McFarland, A.R., Anand, N.K., Ortiz, C.A., Gupta, R., Chandra, S., and McManigle, A.P., "A Generic Mixer for Achieving Suitable Conditions for Single Point Representative Sampling," Health Physics, Vol. 76, pp. 17-26, 1999.
  49. Guo, Z. and Anand, N.K., "Condensation of R-410A In a Rectangular Channel," International Journal of HVAC&R Research, Vol. 5, pp. 99-123, 1999.
  50. McFarland, A.R., Gupta, R., and Anand, N.K., "Suitability of Air Sampling Locations Downstream of Bends and Static Mixing Elements," Health Physics, Vol. 77, pp. 703-712, 1999.
  51. Chintada, S., Kang-Hoon Ko, and Anand, N.K., "Heat Transfer in 3-D Serpentine Channels with Right-Angle Turns," Numerical Heat Transfer, Part A, Vol. 36, pp. 781-806, 1999.
  52. Kim, S.H. and Anand, N.K., "Use of Slots to Enhance Forced Convective Cooling Between Channels with Surface Mounted Heat Sources," Numerical Heat Transfer, Part A, Vol. 38, pp. 1-21, 2000.
  53. Guo, Z and Anand, N.K., "An Analytical Model to Predict Condensation of R-410A in a Rectangular Channel," ASME Journal of Heat Transfer, Vol. 122, pp. 613-620, 2000.
  54. Massoudi, M and Anand, N.K., "Numerical Simulation of Particulate Mixture Flows," Journal of Energy, Heat and Mass Transfer, Vol. 22, pp.295-317, 2001.
  55. Ko, Kang-Hoon and Anand, N.K., “Use of Porous Baffles to Enhance Heat Transfer in a Rectangular Channel,” International Journal of Heat and Mass Transfer, Vol. 46, pp. 4191-4199, 2003.
  56. Masoudi, M. and Anand, N.K., “A Theoretical Study of Heat Transfer to Flowing Granular Materials,” International Journal of Applied Mechanics and Engineering, Vol. 9, pp.383-398, 2004.
  57. Ravindran, P., Anand, N.K., and Massoudi, M., “Steady Free Surface Flow of a Fluid-Solid Mixture Down an Inclined Plane,” Particulate Science and Technology, Vol. 22, pp. 253-273, 2004.
  58. Miranda, B.M.D.S. and Anand, N.K., “Convective Heat Transfer in Channel with Porous Baffles,” Numerical Heat Transfer, Part A, Vol. 46, pp. 425-452, 2004.
  59. H.M.S. Bahaidarah, Anand, N.K., and Chen, H.C., “Numerical Study of Heat and Momentum Transfer in Channels with Wavy Walls,” Numerical Heat Transfer, Part A, Vol. 47, No. 5, pp. 417-439, 2005.
  60. J.G. Barbosa Saldana, N.K. Anand, and V. Sarin, “Forced Convection over a Three-Dimensional Horizontal Backward Facing Step,” International Journal of Computational Methods in Engineering Science and Mechanics, Vol. 6, No. 4, pp. 225-234, 2005.
  61. J.G. Barbosa Saldana, N.K. Anand, and V. Sarin, “Numerical Simulation of Mixed Convective Flow over a Three-Dimensional Horizontal Backward Facing Step,” ASME Journal of Heat Transfer, Vol. 127, pp. 1027-1036, 2005.
  62. H.M.S. Bahaidarah, N.K.Anand, and H.C. Chen, “A Numerical Study of Flow and Heat Transfer over a Bank of Flat Tubes,” Numerical Heat Transfer, Part A, Vol. 48, pp. 359-385, 2005.
  63. H.M.S. Bahaidarah, M. Ijaz, and N.K.Anand, “Numerical Study of Fluid Flow and Heat Transfer over a Series of In-line Non-circular Tubes confined in a Parallel Plate Channel”, Numerical Heat Transfer, Part B, Vol. 50, pp. 97-119, 2006.
  64. M. Ijaz and N.K. Anand, “Simulation of Unsteady Incompressible Viscous Flow Using Higher-Order Implicit Runge-Kutta Methods – Staggered Grid,” Numerical Heat Transfer, Part B, Vol. 52, pp. 1-18, 2007.
  65. M. Ko and N.K. Anand, “Numerical Simulation of Three-Dimensional Combined Convective Radiative Heat Transfer-A Finite Volume Technique,” International Journal for Computational Methods in Engineering Science and Mechanics, Vol. 8, pp. 429-437, 2007.
  66. J.G. Barbosa Saldana and N. K. Anand, “Flow Over a Three-Dimensional Horizontal Forward-Facing Step”, Numerical Heat Transfer, Part A, Vol. 53, pp. 1-17, 2008.
  67. M. Ko and N.K. Anand, “Three-Dimensional Combined Convective Radiative Heat Transfer over a Horizontal Backward-Facing Step- A Finite Volume Method”, Accepted for publication in Numerical Heat Transfer.
  68. J.D. MlCak, N.K. Anand, and M.J. Rightley, “Three-Dimensional Laminar Flow and Heat Transfer in a Parallel Array of Microchannels Etched on a Substrate,” Accepted for publication in International Journal of Heat and Mass Transfer.
  69.  M. Ijaz and N.K. Anand ,“Co-located Variables Approach Using Implicit Runge-Kutta Methods for Unsteady Incompressible Flow Simulation,”. Accepted for publication in Numerical Heat Transfer.

 

Other Publications:

 

Book Chapters

Anand, N.K., "Finite Volume Approach to Heat Transfer/Fluid Flow Problems," Heat Transfer Handbook, Section 401.3, pp.1-16, Genium Publication, Schenectady, NY, 1998.

 

Conference Publications

1.    Anand, N.K. and Tree, D.R., "Steady State Simulation of Single Tube-Finned Condenser Heat Exchanger," ASHRAE Annual Meeting, Toronto, Canada, Paper #2710, 1982.

2.    Anand, N.K., Chen, S.C., and Tree, D.R., "Numerical Solution to Transient Laminar Convective Heat Transfer Inside a Circular Duct," #B.1-107 Proceedings of XVI International Refrigeration Congress, Presented at the XVI International Refrigeration Congress, 1983, Paris, France.

3.    Anand, N.K. and Tree, D.R., "Some Studies of Effects of Axial Conduction in a Tube Wall on the Steady-State Laminar Convective Heat Transfer," WA/HT-24, ASME Winter Annual Meeting, Boston, Massachusetts, 1983.

4.    Chellaiah, S., Viskanta, R., Ranganathan, P., and Anand, N.K., "Analysis of Core and Core Barrel Heat-Up under Conditions Simulating Severe Reactor Accidents," 257, Vol. 83, pp. 314-319, 24th AIChE/ASME National Heat Transfer Conference, Pittsburgh, Pennsylvania, AIChE Symposium Series.

5.    McFarland, A.R., Anand, N.K., Ortiz, C.A., Moore, M.E., Kim, S.H., DeOtte, R.E., Jr. and Somasundaram, S., "Continuous Air Sampling for Radioactive Aerosol, "Proceedings of the 20th DOE/NRC Nuclear Air Cleaning Conference, NUREG/CP-0098, CONF-880822, Vol. 2, pp. 834-846, 1988, presented at the 20th DOE/NRC Nuclear Air Cleaning Conference, Boston, Massachusetts.

6.    Anand, N.K., Schliesing, J.S., O'Neal, D.L., and Peterson, K.T., "Effects of Outdoor Coil Fan Pre-Start on Pressure Transients during the Reverse Cycle Defrost of a Heat Pump," ASHRAE Annual Meeting, Vancouver, British Columbia, VA-89-9-2, 1989.

7.    O'Neal, D.L., Peterson, K.L., Anand, N.K., and Schliesing, J.S., "Refrigeration System Dynamics During the Reverse Cycle Defrost," ASHRAE Annual Meeting, Vancouver, British Columbia, VA-89-9-1, 1989.

8.    Kim, S.H., Anand, N.K., and Fletcher, L.S., "Free Convection Between Series of Vertical Parallel Plates With Embedded Line Heat Sources," ASME Winter Annual Meeting, San Francisco, California, ASME-HTD-Vol. 121, pp. 7-16, 1989.

9.    Choi, J.M., Anand, N.K., and Laster, W.R., "Conjugate Heat Transfer in a U-Shaped Channel with Two Right Angle Turns," Proceedings of the Ninth International Heat Transfer Conference, Jerusalem, Israel, Vol. 3, pp. 297-302, 8-MC-06, 1990.

10. Anand, N.K., Kim, S.H., and Fletcher, L.S., "The Effect of Plate Spacing on Free Convection Between Heated Parallel Plates," ASME Winter Annual Meeting, Dallas, Texas, ASME-HTD-Vol. 153, pp. 81-87, 1990.

11. Choi, J.M. and Anand, N.K., "Heat Transfer in A Serpentine Channel With a Series of Right Angle Turns," ASME Winter Annual Meeting, Atlanta, Georgia, ASME-HTD-Vol. 180, pp. 91-99, 1991.

12. Kim, S.H. and Anand, N.K., "Turbulent Heat Transfer Between a Series of Parallel Plates With Surface-Mounted Discrete Heat Sources," ASME Winter Annual Meeting, Anaheim, California, ASME-HTD-Vol. 210, pp. 43-57, 1992.

13. Choi, J.M., Anand, N.K., and Lau, S.C., "Turbulent Heat Transfer Measurement and Numerical Prediction in a Serpentine Channel," 93-WA/HT-51, International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, 1993.

14. Kim, S.H. and Anand, N.K., "Laminar Heat Transfer Between A Series of Parallel Plates with Surface Mounted Discrete Heat Sources," International Mechanical Engineering Congress and Exposition, Chicago, Illinois, ASME-HTD-Vol. 292, pp. 55-70, 1994.

15. Talik, A.C., Swanson, L.W., Fletcher, L.S., and Anand, N.K., "Heat Transfer and Pressure Drop Characteristics of a Plate Heat Exchanger," Proceedings of the ASME-JSME Thermal Engineering Conference, Lahina, Maui, Hawaii, Vol. 4, pp. 321-330, 1995.

16. Talik, A.C., Swanson, L.W., Fletcher, L.S., and N.K. Anand, "Heat Transfer and Pressure Drop Characteristics of a Plate Heat Exchanger Using a Propylene-Glycol/Water Mixture As the Working Fluid" Proceedings of the 30th National Heat Transfer Conference, Portland, Oregon, ASME-HTD-Vol. 314, pp. 83-88, 1995.

17. Watson, J.C., Anand, N.K., and Fletcher, L.S., "Mixed Convection Heat Transfer Between A Series of Vertical Parallel Plates with Planar Heat Sources," International Mechanical Congress and Exposition, San Francisco, California, ASME-HTD-Vol. 317-1, pp. 401-412, 1995.

18. Lopez, J.R., Anand, N.K., and Fletcher, L.S., "Numerical Model of Laminar Flow Convective Heat Transfer in a Three Dimensional Channel with Baffles," Proceedings of the 2nd ISHMT-ASME Heat and Mass Transfer Conference, Surathkal, India, pp. 463-470, 1995.

19. N.K. Anand and S.H. Kim, "Heat Transfer in Channels Simulating Cooling Passages of Electronic Components," Engineering Technology, Book IV, pp. 60-73, 1996.

20. J.G. Barbosa Saldana, N.K. Anand, and V. Sarin, “Numerical Simulation of Mixed Convective Flow Over a Three-Dimensional Horizontal Backward Facing Step,” Accepted for presentation at the ASME Heat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, July 11-14, 2004.

21. M. Ijaz and N. K. Anand, “Simulation of Time Dependent Incompressible Viscous Flow with Higher Order Implicit Runge-Kutta Schemes,” ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, BC, Canada, July 8-12, 2007.

22. M. Ijaz and N.K. Anand, “Co-located Variables Approach in SIMPLE DIRK Method for Simulation of Unsteady Incompressible Viscous Flows,” 8th ISHMT-ASME Heat and Mass Transfer Conference, Hyderabad, India, January 2008.

 

Presentations

1.    "Steady State Simulation of Single Tube-Finned Condenser Heat Exchanger," ASHRAE Annual Meeting, Toronto, Canada, 1982.

2.    "Free Convection between Series of Vertical Parallel Plates with Embedded Line Heat Sources," ASME Winter Annual Meeting, San Francisco, California, 1989.

3.    "The Effect of Plate Spacing on Free Convection Between Heated Parallel Plates," ASME Winter Annual Meeting, Dallas, Texas, 1990.

4.    "Heat Transfer in a Serpentine Channel with a Series of Right Angle Turns," ASME Winter Annual Meeting, Atlanta, Georgia, 1991.

5.    "Turbulent Heat Transfer between a Series of Parallel Plates with Surface-Mounted Discrete Heat Sources," ASME Winter Annual Meeting, Anaheim, California, 1992.

6.    "Turbulent Heat Transfer Measurement and Numerical Prediction in a Serpentine Channel," International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, 1993.

7.    "Heat Transfer in Serpentine Channels," Society of Engineering Sciences Meeting, October 12, 1994, College Station, Texas.

8.    "Laminar Heat Transfer between A Series of Parallel Plates with Surface Mounted Discrete Heat Sources," International Mechanical Engineering Congress and Exposition, Chicago, Illinois, 1994.

9.    "Sampling of Stacks and Ducts: Probes and Transport Systems," presented to PANTEX Consortium on Plutonium Aerosols, September 10, 1995, Santa Fe, New Mexico.

10. "Mixed Convection Heat Transfer between A Series of Vertical Parallel Plates With Planar Heat Sources," International Mechanical Congress and Exposition, San Francisco, California, 1995.

11. "Numerical Model of Laminar Flow Convective Heat Transfer in a Three Dimensional Channel With Baffles," 2nd ISHMT-ASME Heat and Mass Transfer Conference, Surathkal, India, December 28-30, 1995.

12. Guo, Z. and Anand, N.K., "Condensation of R-410A in a Rectangular Channel," ASHRAE Winter Meeting, Dallas, Texas, February 8, 2000, #4348.

13. H.M.S. Bahaidarah, N.K. Anand, and H.C. Chen, “Flow and Heat Transfer Over a Series of In-Line Cylinders Confined in a Channel,” Society of Engineering Sciences 41 Annual Meeting, October 11-14, 2004, Lincoln, NE.

Book Volumes Edited

1.    "Heat Transfer in Turbulent Flows," ASME-HTD-Vol. 138, edited by Amano, R.S. Crawford, M.E., and Anand, N.K., June, 1990

2.    "Heat Transfer in Turbulent Flows," ASME-HTD-Vol. 246, edited by Amano, R.S., Pletcher, R.H., Sherif, S.A., Watts, R.G., and Anand, N.K., August 1993.

3.    "Heat Transfer in Turbulent Flows," ASME-HTD-Vol. 318, edited by Anand, N.K., Amano, R.S., and Armaly, B.F., November 1995.

4.    “Heat Transfer in Turbulent Flows," ASME-HTD-Vol. 333, pp. 1-91, edited by, D. Wroblewski, N.K. Anand, and R. Pletcher, November 1996.

Technical Reports (Limited to Final Reports)

1.    "Validation and Refinement of a Dynamic Digital Model of a Fan Coil Heating System," M.S. Thesis, Kansas State University, December 1979. (Advisor: J.G. Thompson)

2.    Thompson, J.G., Azer, N.Z., Chen, P.N., Nguyen, V.K., Anand, N.K., and Desai, N.V., "The Effect of Room and Control System Dynamics on Energy Consumption," Mechanical Engineering, Kansas State University, Technical Report RP#212, 1/80.

3.    Anand, N.K. and Tree, D.R., "Steady State Simulation of the Fin and Tube Heat Exchanger Air Conditioning Application," Herrick Laboratories Report #HL 82-1, 4, 1982, School of Mechanical Engineering, Purdue University.

4.    "Numerical Simulation of Single Tube Heat Exchangers," Ph.D. Thesis, Purdue University, August 1983. (Advisor: D.R. Tree)

5.    Anand, N.K. and McFarland, A.R., "Particle Penetration through CAM-Sampler Aerosol Transport Lines," Aerosol Technology Report 5897/01/04/88/NKA, Texas A&M University.

6.    Anand, N.K., Somasundaram, S., and Lovelady, J.P., "The Design, Construction, and Calibration of a Heat Exchanger Calorimeter," Energy Systems Laboratory Report, TAMU, ESL/Con/88-2.

7.    O'Neal, D.L., Anand, N.K., Peterson, K.T., and Schliesing, J.S., "Determination of the Transient Response Characteristics of the Air-Source Heat Pump during the Reverse Cycle Defrost," Energy Systems Laboratory Report, TAMU ESL/88-05R, ASHRAE-479-TRP.

8.    McFarland, A.R., Anand, N.K., Khim, K.D., Ortiz, C., Wong, F.S., and Kettleborough, C.F., "Aerosol Aspects of Mist Lubrication," Turbomachinery Laboratories, TAMU, TRC-TR-5-89 #901.

9.    Anand, N.K., McFarland, A.R., Wong, F.S., and Kocmoud, C.J., "DEPOSITION: Software to Calculate Particle Penetration Through Aerosol Transport Lines," NUREG/GR-0006, U.S. NRC Final Report, 1993

10. Talik, A.C., Fletcher, L.S., and Anand, N.K., "Heat Transfer and Pressure Drop Characteristics of a Plate Heat Exchanger," CHTL-4421-1, submitted to HTRI, 1995.

11. Anand, N.K., Burdick, S., and Griffin, J., "Debugging and Benchmarking of COYOTE Code," submitted to the Sandia National Laboratories, December 1997.

12. Anand, N.K. and Guo, Z., "Condensation of R-410a in a Horizontal Rectangular Channel," EPRI, Palo Alto, California, TR-111754, 1998.

 

Software Copyright:

 

Anand, N.K., McFarland, A.R., Wong, F.S., Kocmoud, C.J., DEPOSITION: Software to Calculate Particle Penetration Through Aerosol Transport Systems, Copyrighted through TEES, 1993.

 

 

 

Back to top